Item # 30-1
Ideal for Surgical Services and
Infection Control Areas
The TruCLEAN Disinfection System is a must
for every professional cleaner in a health care environment.
Quickly and effectively disinfect surfaces in surgical areas and
isolation zones.
TruClean Disinfection System is equipped with a large
36-liter polymer bucket. Wheels are non-marring and glide smoothly
over all floors. Unique brake-lock permits parking on uneven
floors. Compatible with gamma, ETO and autoclave sterilization -
up to 250 degrees F (121 C) for 30 minutes.
Stainless steel dosage sieve conveniently mounts on the
36-liter bucket. Precisely positioned apertures release excess
disinfectant. Dip mop in bucket. Press mop on sieve and
apply to surface. It's simple and quick!
The mop frame (item # 22-38) and handle (item # 22-57)
are included. Cleans a full 16"x5" area in a single pass.
The mop handle adjusts from 34" to 62".
All TruCLEAN Mop Heads and Covers shown at
www.perfexonline.com can be
used with this system.
Complete list of item numbers included with the TruCLEAN
Disinfection system are:
Item #30-36 Bucket with casters in your choice of Red/White/Blue
Item #30-47 Stainless Steel Sieve
Item #22-38 Mop Frame
Item
#22-57 Mop Handle
|
TruCLEAN Pro MOP FRAME (part # 22-38)
TruCLEAN Stainless Steel Handle (part # 22-58)
Exclusive swivel TruCLEAN mop Frame, made of high-grade stainless steel, can be maneuvered onto floors, walls, ceilings, baseboards and confined areas
such as corners or stairs where conventional string mops are notoriously inefficient. Also permits
mopping in an "S" motion, collecting solid particles as the technician mops. Low profiled mop frame
for easy and efficient cleaning under fixtures or other hard to reach surfaces. TruCLEAN Mop Frame
delivers continual surface contact at any angle and is accurately balanced and non-flipping.
Changing mop and sponge heads is a clean and easy operation. A quick squeeze releases the
frame-locking mechanism, enabling contaminated mop or sponge head to be replaced.
Optional one-piece electro-polished stainless steel
handle, Type 304, is 3/4" diameter and 57 1/4" overall. Weighs 2 Lbs.
Compatible with gamma, ETO and autoclave sterilization. (Optional handle show in
picture.)
|
|
TruCLEAN Fixed Position Mop Frame (part # 22-39)
#22-39 TruCLEAN Fixed Position Mop Frame
made of high-grade stainless steel is welded at the
connector and will not allow the mop frame to swivel. Designed for use in
clean room and sterile environments on floors, walls and ceilings. Low profiled mop frame
for easy and efficient cleaning under fixtures or other hard to reach surfaces.
The TruCLEAN Fixed Mop Frame
delivers continual surface contact at any angle.
Changing mop and sponge heads is a clean and easy operation. A quick squeeze releases the
frame-locking mechanism, enabling contaminated mop or sponge head to be replaced.
All TruCLEAN Mop Heads and handles are compatible with the #22-39.
Optional one-piece electro-polished stainless steel
handle, Type 304, is 3/4" diameter and 57 1/4" overall. Weighs 2 Lbs.
Compatible with gamma, ETO and autoclave sterilization. (Optional handle show in
picture.)
|
TruCLEAN ADJUSTABLE HANDLE (part
# 22-57)
 |
The TruCLEAN Adjustable Handle has been developed to meet the ergonomic and
hygienic needs of critical environments. It can be adjusted from 34" to 62" for comfort and those hard-to-reach areas.
Made of high quality polyester and composite materials, the TruCLEAN Adjustable Handle is lightweight, durable and chemically resistant. The TruCLEAN Adjustable Handle is impervious to water, grease, gasoline, detergents, sanitizers and solvents, and
is compatible with gamma, ETO and autoclave sterilization.
Longer adjustable handles available for those hard to reach areas. Part
# 88-12 adjusts from 72" to 144" and our part # 88-18 adjusts from 144" to 216".
|
 |
TruCLEAN YARN MOP
(part # 22-33)
The TruCLEAN Yarn Mop is manufactured from a specially blended synthetic yarn.
It combines high absorbency and strength as well as being inert to bacteria and
chemicals. The material quickly releases captured dirt when rinsed, is fast
drying and won't decay. Durable backing dries fast. Extra stitching assures long
service life, even with repetitive laundering. Isolates areas of use and
curtails risk of cross contamination. The TruCLEAN Yarn Mop, with looped-end construction
thoroughly cleans a full 40cm (16") x 12.7 cm (5") area in a single pass - 40% faster and with less
effort. Surfaces are 33% drier, reducing risk of potential accidents from slippage on wet surfaces.
Unlike conventional string mops, the TruCLEAN Yarn Mop can be used to wet & damp mop and
disinfect floors, walls and ceilings. Looped-end construction far outlasts old-style mop.
No strings to tangle, catch on fixtures or splash onto vertical surfaces.
Laundering can be done in a standard washing machine. since the design of the mop minimizes linting and yarn unraveling.
For mop heads used in controlled environments or requiring strict laundering protocols, the
TruCLEAN Yarn Mop is compatible with gamma, ETO and autoclave sterilization.
Dampen mop prior to placing in autoclave.
TruCLEAN Sponge Mop
(part # 22-34)
Designed specifically for use in clean room and sterile environments, the
TruCLEAN Sponge Mop is ideal for cleaning and disinfecting applications requiring high absorbency
and very low particulate generation.
Clean and disinfect a full 40cm (16") x 12.7cm (5") area in a single pass. Unlike self-wringing
sponge mops that contact surfaces only with the leading edge, our exclusive swivel mop frame
maintains total surface contact, consistently delivering a thorough and even application onto
the surface. Thick-bodied sponge protects delicate surfaces.
Made of a specially formulated grade of flexible polyurethane Foam, the TruCLEAN Sponge Mop has excellent chemical and microbial resistance. Single cell structure has superior liquid retention and effectively captures minute particles. Exceptional abrasion and tear resistance. Conforms to irregular surfaces. Rinses clean and dries quickly. Compatible with gamma, ETO and autoclave sterilization.
Dampen sponge prior to placing in autoclave.
TruCLEAN Cover and Wipe
(part # 22-35)
Meticulously manufactured within a Six Sigma Quality facility, the TruCLEAN Cover provides an unprecedented level of quality assurance and cleaning performance. Clean room laundered and twice packaged for use in sterile environments.
TruCLEAN Cover fits securely over TruCLEAN Yarn Mop or Sponge Mop. Together, they provide a simple and efficient vehicle for applying cleaning solutions to large surface areas without compromising particulate control and wiping protocols. Excellent surface coherence.
The soft cover is knitted from 100% continuous Filament polyester. The double-knit, no-run interlock design guarantees the maximum in abrasion resistance. Ultra-low particle generation and extractables. Excellent chemical and microbial resistance.
TruCLEAN Cover is compatible with gamma, ETO and autoclave sterilization.
Dampen cover prior to placing in autoclave.
The TruCLEAN Cover is the easiest, most practical and most economical way to clean, disinfect
and preserve the integrity of any clean room environment.
TruCLEAN Perforated
Mop Cover
(part # 22-36)
TruCLEAN Perforated Cover is intended for use with our
TruCLEAN HyrdoSorb Sponge Mop. The perforation allows the HydroSorb Sponge
to absorb liquids quickly, holding 15 times its weight in liquids.
Ultra-low particle generation and extractables. Excellent surface
coherence. Cleanroom laundered and packaged for use in sterile
environments. Compatible with gamma, ETO and autoclave sterilization.
TruCLEAN Microfiber Cover
(part # 22-37)
TruCLEAN Microfiber Covers
are made from continuous white knit Microfiber material and have excellent
abrasion, chemical and microbial resistance.
These covers are designed to glide easily across ceilings, walls
and floors. Microfiber covers are compatible with all Perfex TruCLEAN
sponge mops and yarn mops and fits securely when using the TruCLEAN stainless
steel mop frame (#22-38).
The covers are clean room laundered and packaged for use in
sterile environments. Perfex #22-37 are packaged 25 each in a poly sealed
bag.
TruCLEAN Mops (part #
22-29 , 22-31 , 22-32)
|
Part # 22-32
TruCLEAN Anti-microbial Microfiber Mop has an added anti-microbial agent
permanently bonded to the fibers, working to capture, contain and combat
dust and allergens to ensure a bacteria free surface as the result.
Perfex anti-microbial treated mop can eliminate up to 99% of the
bacteria present on the cloth after cleaning. Can be repeatedly
laundered or autoclaved without losing it's anti-microbial properties. |
Part # 22-31
TruCLEAN Microfiber Mop contains many strands of synthetic fiber
made of polyester and polyamide for superior cleaning capabilities. The
small loop microfiber construction provides exceptional performance in
removing liquids, soil, residue and other contaminants from most
surfaces. Perfex microfiber is made for exceptional absorbance and
mop-to-dry performance on wet surfaces. Can be repeatedly laundered and
autoclaved providing exceptional value. |
Part # 22-29
TruCLEAN Cleanroom Mop is constructed of continuously woven
polyester fabric that conforms to almost any shape. This allows for
easier cleaning of floors,walls and ceilings compared to standard flat
mops. Individually double-packaged and laundered in a class 100
cleanroom facility. Can be repeatedly laundered and autoclaved providing
exceptional value. |
TruCLEAN Hydro-Sorb Mop Part# 22-24
TruCLEAN Hydro-Sorb Mop is specifically designed for use in controlled
environments requiring rapid pickup of liquids. Also ideal for
spill control and general cleaning applications. Quickly dries
surfaces without leaving any residue. This unique hydrophilic
polyurethane foam holds 15 times its weight in liquids. Strong and
durable, it resists tearing even after repeated use and is highly
abrasion resistant. 100% lint and fiber free.
Special open cell
formulation is impervious to most chemicals and is compatible with
gamma, ETO and autoclave sterilization. Soak TruCLEAN Hydro-Sorb
Sponge Mop prior to use for easy mounting on TruCLEAN Mop Frame. |
TruCLEAN Sponge Mop
with Fused Cover
Part# 22-34F
TruCLEAN Sponge Mop with Fused Cover is a unique 2-in-1 product.
Combining the Original TruCLEAN Sponge Mop with our TruCLEAN Mop Cover
in one, easy to use, efficient instrument. Designed for use
applying cleaning solutions to large surface areas without compromising
particle control and wiping protocols. Excellent surface
coherence. Compatible with gamma, ETO and autoclave sterilization. |
TruCLEAN Sponge Blocks & Wipes (part #
22-70 , 22-71 , 22-75, 22-76)
TruCLEAN Hydro-Sorb Sponge
Part Number: 22-71
Excellent for Cleanroom particle-free cleaning.
100% lint and fiber free.
Remarkable water absorbing properties.
Holds 15 times its weight in liquids. (Dimensions: 8"x4"x2")
Part Number: 22-76
Excellent for Cleanroom particle-free cleaning.
100% lint and fiber free.
Remarkable water absorbing properties.
Holds 15 times its weight in liquids. (Dimensions: 12"x12"x⅛")
|
TruCLEAN Polyfoam Sponge
Part Number: 22-70
Offering excellent wipe-dry and fluid release.
Soft and pliable when dry.
Non-linting and dimensionally stable.
Chemically resistant. (Dimensions: 8"x4"x2")
Part Number: 22-75
Offering excellent wipe-dry and fluid release.
Soft and pliable when dry.
Non-linting and dimensionally stable.
Chemically resistant. (Dimensions: 12"x12"x⅛") |
|
